Table of Contents
Advertisement
• Checking the accumulative power (Accum Power)
Accumulative power: Values have been continuously accumulated since the initial power is ap-
plied on the power indicator. When wattage is more than 999 999, it will return to "0".
- Screen Description
A C C U M ( P 1 )
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
- Press the LEFT/RIGHT (◀,▶) button to increase/decrease the wattmeter number.
- Press the UP/DOWN (s,t) button to check the electric energy of all indoor units connected.
- In 1.3 or less version, each indoor unit number increases sequentially according to the set number of units.
- In 1.4 or higher version, it displays the address of the indoor unit set for each indoor unit number.
- If the standby power is set to MANUAL, the last page is displayed as follows.
A C C U M ( P 1 )
S T B P
:
• Checking the accumulative gas consumption (Accumulative Gas)
Instant gas: Values have been accumulated since the initial power is applied at the gas meter.
When the displayed gas usage is more than 999 999, it will return to "0".
- Screen Description
A C C U M ( G 1 )
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
- Press the LEFT/RIGHT (◀,▶) button to increase/decrease the wattmeter number.
- Press the UP/DOWN (s,t) button to check the gas energy of all indoor units connected.
- In 1.3 or less version, each indoor unit number increases sequentially according to the set number of units.
- In 1.4 or higher version, it displays the address of the indoor unit set for each indoor unit number.
h In the case of gas on, standby gas usage is not displayed separately because there is no
standby gas.
- In 1.4 or higher version, if you press left/right button(◀,▶), it is displayed as follows in the last page.
In this screen, you can check the accumulated power amount (gas usage amount) of each address
for the entire indoor units.
A C C U M ( A L L )
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
Wattmeter number
Total accumulative wattage
0 . 0 k W h
at P (1) wattmeter
0 . 0 k W h
The accumulative wattage of each
0 . 0 k W h
indoor unit
0 . 0 k W h
Each indoor unit No.
0 . 0 k W h
0 . 0 k W h
D O W N
Gas meter No.
Total accumulative gas usage
0 . 0 k L
at G (1) gas meter
0 . 0 k L
The accumulative gas usage of
0 . 0 k L
each indoor unit
0 . 0 k L
Each indoor unit No.
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
SETTING AND USING METHOD
37
Advertisement
Table of Contents
