Network Features; Qos Features; Security Features - Huawei AP8030DN Product Description

AP8030DN
Product Description



3.2 Network Features

Network features supported by the AP are as follows:

















3.3 QoS Features

QoS features supported by the AP are as follows:










3.4 Security Features

Security features supported by the AP are as follows:
Issue 05 (2017-04-20)
Mesh networking in Fit AP mode
Multi-user CAC
Compliance with IEEE 802.3ab
Auto-negotiation of the rate and duplex mode and automatic switchover between the
Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1q
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
Management channel of the AP uplink port in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
STA isolation in the same VLAN
Access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup in Fit AP mode
Network Address Translation (NAT) in Fat AP mode
IPv6 in Fit AP mode
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
WMM parameter management for each radio
WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Adaptive bandwidth management (automatic bandwidth adjustment based on the user
quantity and radio environment) to improve user experience
Airtime scheduling
Smart Application Control (SAC) in Fit AP mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Product Features (in Fat AP and Fit AP Modes)
16