Connector J2; Connector J3; Connector J4 - Jacobsen ES Series Safety, Operation & Maintenance Manual

5.2.H.25 CONNECTOR J2 ____________________________________________________
Turn the key switch to the "Run" position, navigate to the service
menu.
Information shown for illustration purposes only.
Press the button to return to I/O Diagnostic Menu.
5.2.H.26 CONNECTOR J3 ____________________________________________________
Turn the key switch to the "Run" position, navigate to the service
menu.
Information shown for illustration purposes only.
Press the button to return to I/O Diagnostic Menu.
5.2.H.27 CONNECTOR J4 ____________________________________________________
Turn the key switch to the "Run" position, navigate to the service
menu.
Information shown for illustration purposes only.
Press the button to return to I/O Diagnostic Menu.
5 CONTROLS

Connector J2

J2-1 Lower Sol Off
J2-2 Not Used
J2-3 Lift Sol
Off
J2-4 Fan Relay ON
J2-5 Park Brake Sol Off
J2-6 Fuel Hold
ON
J2-7 Not Used
J2-8 Not Used
J2-9 Not Used
J2-10 Not Used
J2-11 Float Sol ON
J2-12 Weight Transfer Sol
ON

Connector J3

J3-1 Not Used
J3-2 Engine Temp Off
J3-3 Not Used
J3-4 Not Used
J3-5 Not Used
J3-6 Not Used
J3-7 Program Select ON
J3-8 Not Used
J3-9 GND
J3-10 Not Used
J3-11 Not Used
J3-12 Not Used

Connector J4

J4-1 Seat Switch ON
J4-2 Crosscut Switch Off
J4-3 Not Used
J4-4 Not Used
J4-5 Not Used
J4-6 Not Used
J4-7 Start Signal Input Off
J4-8 Not Used
J4-9 Mow Switch ON
J4-10 Neutral Switch ON
J4-11 Sideshift Left Off
J4-12 Sideshift Righ Off
en-37