Message Waiting Memory (Mwm); Save Mwm; Dial From Mwm; Delete Mwm - Mitel 6710a User Manual

Message Waiting Memory (MWM)

The message waiting memory normally stores the number to reach the voicemail box.

Save MWM

1. Place the handset on the phone.
2. Press [ ].
3. Press [ ] and enter the number to be saved.
4. Press [ ] key again to complete saving.
5. The "save" is done successfully with confirmation tone.

Dial from MWM

1. Pick up the handset or press 'Speaker/Handset'.
2. Press [ ].

Delete MWM

1. Place the handset on the phone.
2. Press [ ].
3. Press [ ].
4. The "delete" is done successfully with confirmation tone.

Message Waiting LED

When there is a message awaiting to be read, the message waiting LED is lighted ON or flashed in
red.
The Message Waiting switch (at the back of the phone) is used to select the appropriate MW mode
(HV / + / -). Check the MW type of the connected PBX to work with the phone. Select OFF on the
MW switch to deactivate the message waiting function.
8
Mitel 6710a User Guide