Advertisement
REMOVABLE
OVEN
DOOR
To remove:
1. Open the door to the stop position
(see Illustrat[on),
2. Grasp the door at each side and lift up and off the
hinges,
NOTE:
When the door is removed
and
hinge
arms
are at stop
position,
do
not bump
or try to move
the
hinge
arms.
The hinges
could
snap
back
causing
an
injury
to
the
hands
or
damage
to the porcelain
on the front
of the range.
Cover
the hinges
with
toweling
or empty
towel
roils while
working
in the oven area,
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
still
be
in
the
stop
position.
STOP {BR_
POSITION
HINGE
2. Slide the door down onto the hinges as far as it will
go and close the door°
REMOVABLE
OVEN
RACKS
Be careful
not to scratch
the oven finish
when
installing
or removing
oven racks.
To install:
1. Set the raised back edge of the rack on a pairof rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack a bit and push the
rack all the way in.
To remove:
1, Pull the oven rack out, then up,
Some models
have one standard
oven rack and one
folding
oven rack.
The folding
rack can be conveniently
stored away when
not in use°
Note:
If oven racks
are left in the range during a
clean
cycle,
they
will
darken,
lose their
luster
and become
hard to slide,
if you choose
to leave
the racks
in the oven,
you can polish
the edges
of the racks
with
steel
wool
and apply
a small
amount
of vegetable
oil to the rack
edges
after
the self.clean
cycle,
This
will
make
the
racks
easier
to slide.
16
NGMNT11
Advertisement
