Advertisement
4.
To remove the portable Carpenter's Vise, turn the T-Handle (4) counterclockwise until
released. Be careful the Vise does not fall and cause bodily injury.
1.
Operating instructions for the Carpenter's Vise when it is mounted are the same as the
instructions for the Carpenter's Vise when it is unmounted on page 4.
2.
It is recommended tightening the T-Handle (4) for added stability. Never use this product
for an application for which it was not designed.
Back Jaw with
Clamp (1)
T-Handle (4)
1.
Keep the moving parts oiled, being sure to wipe off any excess oil off of the Handle (7)
and Jaw (1 & 2).
2.
Keep the Jaw (1 & 2) clean so your work piece will not be soiled.
3.
Check and tighten the mounting screws to be sure the vise has not loosened from it's
mounting.
SKU 95203
OPERATING INSTRUCTIONS
mAINTENANCE
For technical questions please call 1-800-444-3353.
Figure 4
Front Jaw (2)
Handle (7)
Page 5
Advertisement
