GoBook II Help
72_0103_001
10 December 2002
© 2002 Itronix Corporation. All rights reserved.
GoBook II™ Help
Calibrating the Touch Screen
Your GoBook II computer has a touch screen display. Follow the guidelines below to calibrate the touch screen for
optimum use.
CAUTION
Always use an approved stylus or your finger.
Never use sharp, hard, or abrasive implements on the touch screen such as ball point pens, pencils, or keys.
They could damage the screen.
To clean the touch screen panel, apply a household glass cleaner to a soft, clean, dry cloth and wipe the
screen.
Calibrating the touch screen
To calibrate the touch screen, open the Calibration Applet by selecting Start, Programs, Mobile Computer Tools, Touch
Screen Calibrator. You can also open the Calibration Applet by selecting Start, Settings, Control Panel, Touch Screen
Calibrator.
After the Calibration Applet starts, click on the Calibrate button
After you have completed calibration by touching the four highlighted points with an approved stylus, select OK to
have the new settings take effect.
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hhDDD5.htm
Page 7 of 74
9/30/2003
Need help?
Do you have a question about the GoBook II and is the answer not in the manual?