Table of Contents
Advertisement
C
E
ILITIES
AIR FILTER (See Fig. 16)
Your engine will not run properly using a dirty air filter.
Clean the foam pre-cleaner after every 25 hours of opera-
tion or every season.
Service paper cartridge every 100
hours of operation or every season, whichever occurs first.
Service air cleaner more often under dusty conditions.
•
Remove knob(s) and cover.
TO SERVICE PRE-CLEANER
•
Slide foam pre-cleaner off cartridge.
•
Wash it in liquid detergent and water.
•
Squeeze it dry in a clean cloth.
Saturate it in engine oil. Wrap it in clean, absorbent
cloth and squeeze to remove excess oil.
•
If very dirty or damaged, replace pre-cleaner.
.
Reinstall pre-cleaner over cartridge.
,
Reinstall cover and secure with knob(s).
TO SERVICE CARTRIDGE
Remove wing nuts and cartridge plate.
•
Carefully remove cartridge to prevent debris from en-
tering carburetor.
,
Clean cartridge by tapping gently on flat surface. If very
dirty or damaged, replace cartridge.
,
Reinstall cartridge plate, wing nuts, precleaner, cover
and secure with knob(s).
IMPORTANT:
PETROLEUM
SOLVENTS,
SUCH AS
KEROSENE, ARE NOT TO BE USED TO CLEAN THE
CARTRIDGE.
THEY MAY CAUSE DETERIORATION OF
THE CARTRIDGE.
DO NOT OIL CARTRIDGE.
DO NOT
CLEAN
AIR SCREEN
(See Fig. 16)
Air screen must be kept free of dirt and chaff to prevent
engine damage from overheating.
Clean with a wire brush
or compressed air to remove dirt and stubborn dried gum
fibers.
ENGINE
COOLING
FINS (See Fig. 17)
Remove any dust, dirt or oil from engine cooling fins to
prevent engine damage from overheating. Air guide covers
must be removed. Remove side panels and hood (See "TO
REMOVE HOOD AND GRILL ASSEMBLY" in the Service
and Adjustments section of this manual).
TOP AIR
GUIDE COVER,
ENGINE
COOLING FINS
USE
PRESSURIZED
AIR
TO
CLEAN
OR
DRY
CARTRIDGE.
FOAM
PRE-CLEANER
-_.
AIR SCREEN
CARTRIDGE
\
AIR GUIDE COVER (BOTH SIDES)
FIG. 17
FIG. 16
18
Hide quick links:
Advertisement
Table of Contents
