Operation - Primer DL-11 User And Maintenance Manual

4. OPERATION

4.1. Operation principle and description:
The machine dries the fibres passing hot air through the textile fibres. This air drags the humidity
and sends it to the outside.
Steps for correct drying:
 Choose the same type of fibre. Do not mix different types of fibres in a drying
cycle.
 Load the dryer.
 Open the power supplies to the machine.
 In the case of an analogue machine:
 Or in the microprocessor version:
Push the START cycle button.

 Remove the load at the end of the cycle.
WARNING. REMOVING THE LOAD WITHOUT CARRYING OUT THE COOL-DOWN
(PROGRESSIVE COOLING) MAY CAUSE BURNS AND DAMAGE THE APPLIANCE.
Note: For coin- or token-operated self-service machines, please see point 9.
96
o Choose the drying duration using the timer.
o Choose the right temperature using the thermostat.
o Choose the drying programme using the microprocessor where all
the parameters for an optimum drying appear. (digital version)