Installation - Primer DL-11 User And Maintenance Manual

3. INSTALLATION

Install the machine according to current regulations
3.1. Position.
3.1.1. Transport and storage.
The machine must be transported always on its pallet and original packaging to guarantee its
integrity. Transport the machine to the definitive work place.
Remove the packaging and make sure that it has not been damaged during transport. In no
event install or keep the dryer outdoors.
If the machine has to be stored for a long time, cover it with its original packaging to protect it
from external agents and keep it in the optimum environmental conditions. It is also
recommended to disconnect it from the electricity, steam or gas supply network.
3.1.2. Location.
Install the machine in a big room to obtain efficient work conditions and to guarantee the
sufficient ease of movement of the workers using the machine.
The definitive position of the machine must allow its correct use. The distances indicated on the
following drawing must be observed to allow correct maintenance by authorised staff.
Minimum operating space. 1.50 m at the front, and rest according to diagram.
75