Pause Time - Primer DL-11 User And Maintenance Manual

The recommended option is AUTO, which is the intelligent option, designed to determine the
optimal air flow at which the air should recirculate at any moment in order to ensure maximum
water extraction in the shortest possible time.
The HIGH option permits the maximum opening of the gate, thus obtaining the maximum possible
flow of recirculated air. The position of the gate does not change during the cycle.
The MEDIUM option limits the opening of the gate to an intermediate level thus obtaining a
moderate flow of recirculated air. The position of the gate does not change during the cycle.
The LOW option limits the opening of the gate to a low level thus obtaining a low flow of
recirculated air. The position of the gate does not change during the cycle.

8.3. PAUSE TIME

The dryer is fitted with drum rotation reversal as standard. It is necessary for the drum to stop
before starting to rotate in the opposite direction. The PAUSE TIME parameter defines the time that
the drum stops for during the drum rotation reversal process. The value is given in seconds. To
modify the value shown on the screen, use the INC () and DEC () keys to increase or decrease
this parameter and the SELECT key to confirm the change and go to the next option. The default
setting of this parameter is 1 second.
8.4. PAUSE TEMP
The PAUSE TIME parameter defined above is only effective when the programmed
temperature is less than a certain value. This value is the PAUSE TEMP value and is given in ºC.
Therefore, when the temperature selected in the corresponding programme is lower than the value
defined in PAUSE TEMP, the drum rotation pauses during the rotation reversal for the time period
defined in the PAUSE TIME parameter. To modify the value shown on the screen, use the INC ()
and DEC () keys to increase or decrease this parameter and the SELECT key to confirm the
change and go to the next option. The default setting of this parameter is 40 ºC.
PAUSE TIME
01
PAUSE TEMP
40
107