Page 2
Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. The products are designed to make your A/V device use more convenient, comfortable, productive and cost-efficient.
PACKAGE CONTENTS: 1. Main unit 1pcs 2. AC power adapter 1pcs 3. User manual 1pcs FEATURES OF THE INTERFACE: FIG.1.0 Rear Panel View ON/OFF:Power Switch DC12V: DC input IN: DVI-D input port OUT 1-8 DVI-D output port NOTE : EDID MODE: After the splitter is powered on, and then there is a display machine connected to the OUT1, the splitter will get the EDID of display machine connected OUT 1.
Page 4
OPERATIONG AND CONNECTION: 1.Connect one single link DVI-D cable from a DVI signal source into the input port of splitter. 2.Connect single link DVI-D cables from TV/Monitor into the DVI output ports of splitter. 3.Connect DC plug of AC adapter to DC jack and inserted into the power socket. FIG.1.1 CONNECTION DIAGRAM...
SPECIFICATIONS: DVI interface type DVI-D 29-pin, female Single link input/output resolution up to 4096x2160@30Hz Max signal bandwidth 340MHz Max baud rate 3.4Gbps Serial Link Input/Output TMDS signal 0.5~1.5Volts p-p(TTL) Input/Output DDC signal 5Volts p-p (TTL) Max working current 1A/12V Power adapter AC 100V~240V 50HZ/60Hz, DC12V/2A Operating Temperature range -5 to +45℃...
Page 6
FAQ: Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: Problem Solutions Description 1. Check if the power adapter head is truly and correctly inserted Non-Power-Conne the power socket.
Need help?
Do you have a question about the LM-DVI-108B and is the answer not in the manual?
Questions and answers