LINK-MI LM-DA01-Audio User Manual

Digital to analog audio converter

Digital to Analog Audio Converter

Table of Contents

1.0 introduction ............................................1

2.0 Specifications............................................2

3.0 Package Contents.....................................2

4.0 Panel Descriptions....................................3

Dear Customer

Thank you for purchasing this Audio Converter.

For optimum performance and safety, please read these instructions carefully before

connecting, operating or adjusting this product. Please keep this manual for future

reference

1.0 Introduction

This Digital to Analog Audio Converter is designed for either home or professional audio

switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and

available for connection to an external device such as an amplifier via standard

RCA-style jacks. This Converter is small in size and quite easy to install.

This Converter has many features that enable it to perform in a superior manner. Among

those features you will find:

1. Converts Coaxial or Toslink digital audio signals to analog L/R audio

2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.

USER MANUAL

LM-DA01-Audio

Table of Contents

Do you have a question about the LM-DA01-Audio and is the answer not in the manual?

Page 1 USER MANUAL Digital to Analog Audio Converter LM-DA01-Audio Table of Contents 1.0 introduction ……………………….…….……...1 2.0 Specifications………………..……..…..….…….2 3.0 Package Contents…………………….…………2 4.0 Panel Descriptions………………………………3 5.0 Connection and Operation……...………………4 Dear Customer Thank you for purchasing this Audio Converter. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product.
Page 2 3. 24-bit SPDIF incoming bit stream on left and right channels 4. Provides electromagnetic-noise-free transmission. 5. Easy to install and simple to operate. 2.0 SPECIFICATIONS Signal Inputs/Output Input Audio Coaxial or Toslink digital audio Output Audio L/R audio and 3.5mm Connector Input audio connector Toslink、1XRCA(Coaxial)
Page 3 5.0 CONNECTION AND OPERATION Before installation, please make sure all devices you wish to connect have been turned off. 1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables. 2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate L/R cable. 3) Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.