Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LINK-MI LM-SVG1
Summary of Contents for LINK-MI LM-SVG1
-
Page 1: User Manual
3G SDI to VGA Scaler Converter Model No.: LM-SVG1 User manual Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. - Page 2 I. Introduction The SDI to VGA scaler converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on VGA displays while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on VGA displays thanks to the built in this converter.
- Page 3 5. Connect with other units to extend your signal over long distances 6. Simultaneous display with SDI /VGA signals 7. Alternative audio output to analog 2CH 8. Supports signal transmission distances of up to 300M for SD signals, 200M for HD signals and 100M for 3G signals 9.
- Page 4 IV. Specifications SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C SDI Transmission Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s SDI in/out Resolution SD: 480i@60, 576i@50 HD:720p@50/60, 1080i@50/60 3G:1080p@24/25/29.97/30/50/59.94/60 VGA Output Resolution 800x600@60Hz,1024x768@60Hz,1280x720@60Hz,1440 x900@60Hz,1280x1024@60Hz,1680x1050@60Hz,1600x 1200@60Hz,1920x1080@60Hz, 1920x1200@60Hz Input Port 1 x BNC (SD/HD/3G-SDI) Output Port 1 x BNC (SD/HD/3G-SDI), 1 x VGA,1 x Earphone(L/R) ESD Protection Human body model...
- Page 5 Storage Temperature -20° C ~ 60° C / -4° F ~ 140° F elative Humidity 20 ~ 90% RH (Non-condensing) Power Supply DC 5V -12V Power Consumption (Max) Dimension 95mm x 60mm x 25 mm Weight 260g V. Operation controls and Functions...
- Page 6 SDI IN: This slot is where you connect the SDI source output for SDI signal sending to be display on screen. SDI OUT: This slot is where you connect the SDI display with SDI cable for input source display. POWER LED: This red LED will illuminate when the device is connected with power supply. DC IN: Plug the 5V-12V DC power supply into the unit and connect the adapter to AC wall outlet.
- Page 7 VI. Application Example...
Need help?
Do you have a question about the LM-SVG1 and is the answer not in the manual?
Questions and answers