Table of Contents
Advertisement
W770 Wireless Headset User Manual
II. INTRODUCTION Of heaDSeT CONNeCTION
1. First, connect the USB Dongle to the USB interface of the computer. The computer will
2. Turn on the headset. After it completes connection with the USB Dongle, the headset
III. heaDSeT bUTTONS
1. On/Off
2. Toggle switch
― 2 ―
W770 Wireless Headset.indb 2
automatically recognize the USB Dongle. After it prompts that the device installation is
completed, the device can be used normally (with the computer providing tips for first
use).
can be used normally.
On/Off
Charging
Indicator
a. Power On: By pressing this button for over 1 second in power off state, blue LED
lamp is constantly on, and the headset is started.
b. Power Off: By pressing this button for over 1 second and then releasing it in power
on or playing state, blue LED lamp is off, and the headset is powered off.
a. Pause/Play: In playing state, press middle part of this button to pause, and press
middle part of this button again to resume the playing.
b. Previous/Next: Press this button and hold for a moment to play the previous/next
song.
c. Volume +/-: Toggle this button upwards/downwards to increase/decrease the
volume.
Working State
Indicator
Toggle Switch
Charging Port
2011-12-6 14:24:20
Advertisement
Table of Contents
