Download Print this page

Snapper GT600 Series Operator's Manual page 15

Hydro tractor & mower deck, mower deck
Hide thumbs Also See for GT600 Series:

Advertisement

Dashboard Display Functions
The dashboard display (Figure 3) shows a variety of
B
C
D
E
F
engine operation and control status information, as
explained in the descriptions below.
G
a
a. Irregular Voltage
Indicates that the voltage being produced by the charging
system and battery is higher or lower than normal levels.
B. Rear PTO light
Indicates that the optional rear PTO is engaged.
C. Mid (Front) PTO light
Indicates that the mid PTO is engaged.
K
J
I
H
l
D. Hour Meter/Clock
Displays number of hours the unit has been operated.
E. Cruise Control light
Figure 3. Dashboard Display
Indicates that the cruise control is engaged.
F. low Oil Pressure light
Indicates that the engine oil pressure is low. If this indi-
cator lights, shut the engine off immediately and contact
your dealer.
G. 4 Wheel Drive light (4WD Models Only)
Indicates that 4 wheel drive is engaged.
H. Fuel Separator Full light
Indicates that the fuel separator is full and must be emp-
tied.
I. Fuel Gauge
The fuel gauge shows the level of fuel in the fuel tank.
J. Tachometer
Displays the engine RPM. Normal operating speed is
3400 RPM. Do not operate at less than 3000 RPM during
normal use.
K. Coolant Temperature
Shows the engine coolant temperature.
l. Glow Plug light
Indicates that the glow plugs are heating. Leave the key
in the run position until the light goes out, then turn the
key to start.
16

Hide quick links:

Advertisement

loading