Wiring Provisions for
Vehicle Grille Lamps and
Speaker/Siren - SEO 6J3
Wiring provisions are provided for
connection of customer control
switching to customer installed grille
lamps and speaker/siren. The
interior termination of the wires are
in the 16 cavity connector located
at the equipment mounting plate
between the front seats. The wiring
circuits are routed from underneath
the instrument panel to a 61 cm
(2 ft) coil secured in the area behind
the grille, to the left of the hood
latch.
Special Equipment Options
Spotlamp Provisions -
SEO 7X8
Provision for customer installed
spotlamp includes hole through the
left pillar, LH spotlamp bracket and
accessible power lead.
Spotlamp Provisions -
SEO 7X9
Provisions for customer installed
spotlamps includes holes through
left and right pillars, LH and RH
spotlamp brackets and accessible
power leads.
Hole in Roof - SEO 6B7
A hole is provided on the center line
of the roof, aligned with the door
center pillar and a sealing harness
grommet is installed.
15-13