Table of Contents
Advertisement
Caution (Continued)
Do not route wiring in areas
of the vehicle where
temperatures can be high or
where wiring may be cut,
pinched, or rubbed.
See that all added wiring is of
the same or larger gauge
than the wire it is being
attached to for proper fuse
protection.
Be sure that all holes drilled
in the body are properly
sealed and corrosion
protected. See that the
vehicle's wiring harnesses,
piping, and other components
have not been displaced or
damaged during customer
installations of equipment and
wiring.
(Continued)
Caution (Continued)
Do not route wiring or
equipment which could
interfere with roof-mounted
side impact airbags. See
Airbag Deployment Diagrams
on page 3-22.
Caution
Overloading the vehicle's
electrical system may damage
your vehicle's accessories. Do not
overload the vehicle's system by
having unnecessary accessories
on at the same time.
Special Equipment Options
Auxiliary Battery
(SEO K5S)
1. Auxiliary battery
2. Auxiliary power junction block
3. Right side rear compartment
relay center
4. Battery isolation relay
5. Prefuse assembly
6. Ground stud
This feature consists of a 700 CCA
auxiliary battery (1) mounted on the
passenger side of the trunk and
15-7
Advertisement
Chapters
Table of Contents
