Wiring Provisions For 12-Volt Battery Power Supply - Chevrolet Caprice 2014 Owner's Manual

Engine Oil Cooler
Vehicles with the 6.0L V8 engine
include an engine oil cooler. The
oil-to-coolant oil cooler is mounted
on the lower left side of the engine,
forward of the oil filter.
Wiring Provisions for
12-Volt Battery Power
Supply
1. Ground stud
2. Prefuse assembly
3. Auxiliary power junction block
4. Right side rear compartment
relay center
An 8 mm ground stud (1) is located
in the trunk on the passenger side
of the vehicle.
Special Equipment Options
The auxiliary power junction
block (3) is split to provide two
circuits and can be used to connect
customer-furnished equipment
directly to the battery through
6.0 mm² (10 gauge) auxiliary battery
module wiring and two 60 amp
prefuse assembly (2) fusible links.
A maximum of 100 amps
(1200 watts) can be connected.
Police relay outputs and control
circuit connections are located at
the front of the slotted equipment
mounting plate between the front
seats in a coiled branch of the body
harness and the circuits are
terminated in two connectors.
Battery power is supplied through
two prefuse assembly (2) fusible
links, one 100 amp and one 50 amp,
to three circuit breakers and two
control relays located in the right
side rear compartment relay
center (4). A 50 amp circuit breaker
feeds power directly from the
100 amp fusible link through a
6.0 mm² (10 gauge) wire. Two
30 amp circuit breakers supply
15-3