Voice Recognition - Chevrolet Caprice 2014 Owner's Manual

push to begin playback. This
may happen depending on how the
device communicates over
Bluetooth.
Some phones support sending
Bluetooth music information to
display on the infotainment system.
When the infotainment system
receives this information, it will
check to see if any album art is
available and display it.
When playing music on the
infotainment system from a
Bluetooth device, make sure the
Bluetooth device is unlocked and
the intended music application is
showing on the home screen.

Voice Recognition

Voice recognition allows for
hands-free operation of the
infotainment system features.
Voice recognition can be used when
the infotainment system is on. The
system maintains a minimum
volume level.
Using Voice Recognition
1. Press / on the steering
wheel. The audio system mutes.
A voice prompt states, Please
say a command. Wait until the
tone is heard before speaking.
If there is no tone, make sure
that the volume is turned up.
While voice recognition is active,
the system displays a
in the top right of the screen.
2. Clearly speak one of the
commands listed later in this
section.
Infotainment System
Press /
wheel to skip the voice prompt
messages.
Cancelling Voice Recognition
1. Press and release
the steering wheel control to
cancel a command, if the system
response does not match the
voice command, or say
Goodbye or Cancel.
2. The system replies, Goodbye.
Helpful Hints for Speaking
Commands
When multiple commands are
available, choose the command
that works best for you.
Words in parentheses are
optional. For example, for the
symbol
command Tune FM
(frequency), saying Tune FM
87.7 or Tune FM are both
valid commands.
7-25
twice on the steering
/ on