Trademarks And License Agreements - Chevrolet Caprice 2014 Owner's Manual

Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
This allows a phone number to be
dialed by entering the digits one at
a time.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Digit Dial.
3. Say each digit, one at a time, to
dial. After each digit is entered,
the system repeats back the
digit it heard followed by a tone.
After the last digit has been
entered, say Dial.
If an unwanted number is repeated
back, say Clear to clear the last
number.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. After the tone, say Re-dial. The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.
Clearing the System
Unless information is deleted out of
the vehicle Bluetooth system, it will
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see Deleting a Paired Phone/
Device.
Infotainment System
Trademarks and
License Agreements
FCC Information
See Radio Frequency Statement on
page 13-12.
Made for iPhone mean that an
electronic accessory has been
designed to connect specifically to
iPhone and has been certified by
the developer to meet Apple
performance standards.
iPhone are trademarks of Apple
Computer, Inc., registered in the
U.S. and other countries.
7-35