Advertisement
Wireless Sensor System
Option T - Timeout Configuration
Menu option T allows you to enable a global timeout for the sensors activated in the system. This timeout will set the data of a
sensor, which has not been heard from in the specified time, to zero. This can be used to set alarms for sensors that have stopped
communicating.
Press SHIFT+T to enable the timeout. Once enabled, you are required to set the number of minutes before a sensor gets timed out.
This can be 15 – 120 minutes (2 hours). This is a global timeout, so all sensors activated in the system will be subject to this setting.
To deactivate, reenter this option, and press SHIFT+T again.
You can also update the timeout setting at this point as well. Press U to update the timeout.
- 20 -
Advertisement
