Advertisement
Wireless Sensor System
Option N – Configure the Network ID
Menu option N is for configuring the Network ID. The Network ID is a unique identifier so that data packets are received by the
proper wireless gateway. There are 26 ID's available for use in the system, which are represented by the letters A-Z.
The system will warn you about changing the Network ID and you must select if you want to continue. If you press Y for yes, at the
next prompt, press A-Z to designate your Network ID preference, and the Network ID will be immediately changed. If you press N
or press any other key, configuration will be cancelled and you will return to the main menu options.
This option allws for easy user selection as well as a range of choices that is large enough to accommodate large-scale
deployment of sensors and gateways in close proximity. Selecting the Network ID can be done in uppor or lower case.
Note - Selecting the Network ID should be done before any sensors are configured by the gateway as a the gateway assigns the
Network ID to the sensors through the USB port.
- 12 -
Advertisement
