Philips EasySense Manual page 3

EasySense fixture-mount sensor
Product Data (continued)
All specifications are typical and at 25°C Tcase unless otherwise specified.
Daylight Sensing
Enable/Disable
Auto-Calibration
Viewing Angle
Task Tuning
Full Light Setting
Environment & Approbation
Operating Ambient Temperature Range
Operating Humidity
Storage Temperature
Storage Humidity
Max Case Temperature (Tcase)
Agency Approbations
Certification
Warranty
Digital Interface
Other
Wireless Protocol
Encryption
LED Status Indicators
No. Drivers per Sensor
Max Distance Switch-to-First-Fixture
Max Distance Fixture-to-Fixture
No. Switches per Group
Field Configuration
Compatible LED Drivers
Driver Model Number
XI040C110V054VPT1
XI075C200V054VPT1
Specifications available at www.philips.com/xitaniumsr/na.
EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 3 of 12
Default enabled
Upon power-up
40° (half value sensitivity); 2% cut-off point at 75°
5-100%
0°C to 55°C
0 – 95% non condensing
-25°C to 85°C
0-95% non condensing
55°C
UL, CSA; FCC; Tested and approved for use in plenums
California Title 20
5 years
Xitanium SR
Zigbee, IEEE 802.15.4
AES-128
Red, Yellow. Yellow LED on: Vacancy & Sensor is functional; Red LED on: Occupancy detected
4 max
33ft line-of-sight
40ft line-of-sight
5 max
via NFC or IR, parameters set via Philips field apps
Description
Xitanium 40W 0.1-1.1A 27-54V 120-277V SR
Xitanium 75W 0.1-2.0A 27-54V 120-277V SR