Table of Contents
Advertisement
3
Unpack equipment in accordance with instructions listed in Chapter
2.
Warning:
When selecting a location for your Mobil Indoor Speedpass
equipment, avoid areas having:
Direct sunlight or objects that produce heat.
Excessive dust.
Electrical "noise" or devices that cause excessive voltage
variations such as air conditioners, fans, or high frequency
security systems.
Installation Procedures
Use the following procedures to install and power up the Mobil
Indoor Speedpass.
1.
Place the unit close to the POS equipment.
2.
Uncoil the Multicable and ensure that it does not kink or is
not placed under heavy equipment.
3.
Uncoil the Power Supply cable.
4.
Mount the unit on a custom stand, if applicable.
Installation
To reduce the risk of fire, do not place this unit near
any heat producing source.
5
Installation
Advertisement
Table of Contents
