6,
From the s',_
end of b'le replacement motor, cut
the thread_l portion of the motor shMt off using a
hacksaw. See Rgure 3.
_LU_IABLE
CUI"II'IREAOED
7.
_th
an allenwrench, remove re pulley t'rom the
dalec6ve motorand reinstallit on the mplacemem
motor.Be _uro to push pull_y ontothe motor st,._
allthe way andtightenthe setscrew securely in place.
9.
PositionmotoraSshownb_
5. Note the locazior_
of the motor swl_.
Secure zpotor to bracket with
the odglnaJmotordamps.
1
Compare and note difference between the motor
s_etah of the defe_,e
motor and the switch of '_e
new mp|a_ement motor, II the switches are the same,
simply inst_l] the motor in reve_
order you've
removed the defeotive motor. See F_v._e$ ,dA& 4B.
If not. proce_:l to step 9.
NOTE:
Overload protector is part of the plug-
gable
switch on the replacement
motor and
separete on the old motog 9wit_.
OVERLOAO PROTECTOR
OLO
MOTOR
SWITCH
omen .o
RGURE 'J
279807
FIGURE 44
(¢ontP,_O