INSTALLATION
AND WIRING
INSTRUCTIONS
for Pluggable Motor Replacement
_
ThlLs Iat C_nt_lnt:
I
Motto A_membly
2 !/_" Ferule Tmmlnals (kwulated)
1 Sheet. to.ruction
EI,e_trlcal 8h©.:k X_,_tsrd
Dis_mtecd
power INlf_
servl_g.
Failure tO do so could resuR In
s_loUa
ht|ury ot death.
NOTE TO THE INS.T.A_ER:
This motor kit is an authorized FSP ser_ce _e_ment
p._t.for your epphc_tlon. The motorin this .kitmay or may notbe .klentl_lto your
ore.moOr, if your _re, m motor ha=the ptuggable mR
_it_
(_e _ure.4B),
mpmceme eewlcemotor In me samemanner as you mmo_ __
motor.
If your doteOtlve motor has the switch where the wire lead from the _n
harness
oonne_
rfollow Instru_ons below.
Potm_tlat Fire Hazed
andlor
Nulsam_e
"l'dpplng of Motor Protector
00
NOT under any c4mumstance
attempt
to remove
oH"replace
the motor switah
from this plugglb|e
_rvice
motor. The
swltoh is o non-serviceable
component,
Failure
to do so oouid
result
In fire, serious
injury or death,
.
Remove
Ixdley from replaaementmotor by using.two
(2) open end or adjual_de wrenches. Place one on
the motor shaft, rlghtbehb_:lglS ¢ulley, _
the other
on the pulley. Holdi_the
motor shelf in ple.cewith
one (1) wrench, turn puikly with o_r
wrench In a
COunte_e
dlmotlon to remove pulley. See
Figure E.
Remove defective motor using standarclmotor
removalprocedures.
5. Remove beltrestrainerfromreple(;eme_t motor.,._ee
F/gum2,
2.
Compare
and note the difference between the
detective motor and your new replscement motor The
first thing
you will need to' compare is the motor
pulleys. The I_Uey supplied with the replaoement
motor can be used in zdl _ppgc_lons.
Al_ough
g_ere m_ two (2) €_ses, you may want Io use the
pulley from the def_t_ve motor. See Rgure I forthese
_i0VE PULLEY
2.SPEED
APPUCAT_ON
FAg[IRE!
NOTE:
It you choose not to reuse your pulley
from the defective mlptor as shown In Figure I,
you will loose the 2..speed or 3-speed option.
fns(rucSon Sheet 279807 7194