Connecting With The Pc - LG L1960TQ User Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the product, ensure that the power to the product, the computer
system, and other attached devices is turned off.
2.
Connect the signal cable
connection.
3.
Connect the power cable
plug the cable in the outlet.
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
DVI-D DC-IN D-SUB
[ Connecting the cables]
4.
Touch the pawer button
The 'Self Image Setting Function' will automatically run
when the product is on. (Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the product for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the product while in use, or wish to manually run this function once again, push
the 'SET/AUTO' button on the front panel of the product. Otherwise, you may execute the ' Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
. When attached, tighten the thumbscrews to secure the
1
with the AC-DC adapter (AC-DC power supply)
3
DVI-D DC-IN D-SUB
3
1
DVI-D(This feature is not available in all countries.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
in front to turn on the product.
A5
, and then
2
[ Arranging the cables]
2
Wall-outlet type
PC
PC-outlet type
PC
PC
MAC