A&D LIFESOURCE 1200 ULTRACONNECT Instruction Manual page 15

USING THE MONITOR
Device Setup (Pairing)
1. Ensure the Bluetooth
mobile device is ON.
2. Select UA-1200BLE from the Device
Setup screen on the app.
3. Bring the mobile device near the
monitor.
4. Accept the pairing request from the
pop-up window.
Multiuser Pairing
The monitor can be registered for up to 6 users. Follow the
above instructions to pair the mobile device for each user.
New users can be added anytime. The user who has the
lowest frequency of measurement times will be cleared once
the device has reached the 6 user max.
Note: If new user uses the same mobile device, then re-pairing is not required as
this has been complete.
The communication distance between this monitor and the
receiver device is about 33 feet (10m). This distance can be
reduced by the conditions in the surrounding environment,
so be sure to check that the distance is short enough for a
connection to be made after measurement is complete.
function of the
®
The icon to the left will
blink on the monitor.
CAUTION!
E-15