Advertisement
Operating Features
VIDEO
Button
Repeatedly
press the VIDEO button to select (highlight)
the video function you want to adjust, then press + or -
to adjust it to your personal
preference.
Pressing
the
RES/MEM
button lets you move back up the screen (one
item per press).
2!
The COLOR function adjusts the amount of color in the picture.
Press + to increase color or press - to decrease color.
RES/MEM
VIDEO
The video menu will automatically
disappear
from the
screen if you do not press + or - within a few seconds.
Whenever
a menu or display disappears
from the screen,
the + and - buttons on the front of the TV become
the
volume adjustment
buttons.
Via remote control, your TV will "remember"
which
function
you displayed
last-even
after the menu has
disappeared
from the screen.
So, if you want to adjust the
same function again, simply press the + or - button on the
remote control.
The last function you adjusted
will
reappear
on the TV screen.
The TINT function adjusts the color of flesh tones. Press + to add
more red tint, or press - to add more green tint.
The CONTRAST function adjusts the overall brightness and contrast
of the picture. Press + to increase contrast, or press - to decrease
contrast.
The BRIGHTNESS function adjusts the brightness of the dark
portions of the picture. Press + to increase brightness, or press - to
decrease brightness.
The SHARPNESS function adjusts picture sharpness. Press + to
increase sharpness, or press - to decrease sharpness.
The PICTURE RESET function lets you quickly change all the
video functions (shown above) back to the factory settings. Press
either + or - to reset the video functions.
Adjusting
for a Color Picture
that Pleases You
1. Decrease color to minimum.
This will leave a black-and-
white image on the screen.
2. Adjust contrast until the picture pleases you.
3. Adjust brightness until the black parts of the picture appear
black. You may need to wait until the picture shows
something you're sure is black to make this adjustment.
Be careful not to lose the details in darkly shaded areas.
4. Increase color until you reach a pleasing level of intensity.
5. Adjust tint until flesh tones or other color objects appear
natural.
6. Adjust sharpness for a pleasing level of picture sharpness.
(For weak signals, the picture may be more pleasing with
sharpness decreased.)
Custom Picture Memory
for Input Channels
The input channels are the channel numbers you select to see
signals from components (like a VCR) that are connected to the
INPUT jacks on the back of the TV. Selecting channel 90 lets
you see the signal coming from whatever component is attached
to the S-VIDEO connector, channel 91 lets you see the signal
from the INPUT 1 jacks, and channel 92 lets you see the signal
from the INPUT 2 jacks. Your TV is equipped with a custom
picture memory for these input channels. When the TV is tuned
to one of these channels (90, 91, 92), you can change the picture
settings for that component's signal as desired without changing
the settings of any other channel. This is very useful because
you'll be able to adjust for the best picture from each of your
components and the TV will remember those settings
automatically the next time you tune that input channel.
Advertisement
