Advertisement
Caring for Your TV
Trouble Checks (continued)
Noisy stereo reception
No picture, no sound but power light
is on
Sound okay, picture poor
Picture okay, sound poor
No stereo on known stereo station
When menu is displayed,
pressing
RES/MEM
does not go to previous
function.
Picture appears tilted
No closed captioning
Black bars appear on screen
• May be a weak station.
UseAUDIO
button to change STEREO/SAP
function
to MONO
setting instead of STEREO.
• Maybe someone
changed CABLE/AIR
function to wrong position.
• Maybe a vacant channel is tuned.
• For Channels
90, 91, and 92, make sure the component
connected
to those
INPUT jacks is turned on in order to see picture.
• If watching
VCR (connected
only through antenna input), make sure TV is
tuned to channel 3 or 4-same
as CH3/CH4
switch on VCR. Also check to
make sure TV/VCR
switch on VCR is in correct position.
• Check antenna connections.
• Try adjusting SHARPNESS
function to improve weak signals.
• Try another channel.
• Try adjusting
VOLUME,
BASS, and TREBLE controls.
• If station is sending stereo, try changing
STEREO/SAP
function to MONO
setting for clearer sound.
• Make sure STEREO/SAP
function
is in STEREO
mode.
• Maybe remote is not in "TV Mode".
Press TV button, then press RES/MEM
again.
• Try adjusting
the PICTURE
TILT switches on the back of the TV.
Details are on page 3.
• Turn on the CAPTIONING
function.
• TV program
does not have closed captioning.
• Turn off the CAPTIONING
function.
34
Advertisement
