Advertisement
Connecting Your TV
Cable-TV Connections
Follow one of these steps to connect a cable-TV
system to your TV instead of a home antenna.
Since cable-TV
systems
vary, you may wish to consult your local cable-TV
company
for additional
information.
A
Follow this diagram if your cable company does not require a converter/decoder box (no scrambled channels):
CASLFJANTENNA
---(_)
Incoming
_[_
Cable
_1_-
BACK
OF TV
B
Follow this diagram if your cable company requires a converter/decoder
box that can be controlled by remote control. Most
brands of remote-controllable boxes can be controlled by the remote that came packed with your TV. Details for
programming your TV's remote to also control the converter/decoder
box are on page 23.
Incoming
CONVERTER/DECODER
BOX
BACK
OFTV
Remember to tune your TV to the output channel of
the converter box (usually 2, 3, or 4) when selecting
channels via the converter box.
C
Follow this diagram if your cable company requires a converter/decoder box that cannot be controlled by remote control:
Incoming--
Cable
®
©
©
CONVERTER/DECODERBOX
BACK
OF "IV
Note: These optional accessories (2-way splitter (_), A/B switch (_), three coaxial cables @,)
are available from most dealers or electronics supply stores.
• The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote control.
• The "B" position allows you to select scrambled channels
via the converter box. Remember to tune your TV to the
output channel of the converter box (usually 2, 3, or 4)
when selecting channels via the converter box.
21
Advertisement
