Advertisement
Connecting Other Components
Standard VHS VCR (Not S-VHS)
(These connections
allow you to record TV programs
and play back tapes.)
Preferred
Method
2-Way Signal Splitter*
/
mln
_/
IN F_)ANT
OUT TO TV
Coaxial Antenna Cables*
/
Back of VCR
Back of TV
AUDIO
@_-@
HI-FI
- OUT
- SELECT
R/
CABLE/ANTENNA
INPUT
1 "_
L
(_)
S- VIDEO
AudioNideo
Cables*
Shown here is the preferred method of connecting a VCR to
your TV. This method uses a 2-way signal splitter to run
separate signals to the VCR and TV. This way you can view
either TV programs or VCR tapes and not be concerned about
the position of the VCR's TV/VCR switch.
Note: When connected this way, the audio/video connections from the
VCR to the TV are required in order for you to watch tapes being
played by the VCR.
Operation:
• If the VCR is connected to INPUT 1 jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT 2, select
channel 92 on the TV to view whatever the second device is
playing.
Simplified
Method
Incoming
Cable
13_1"TO "t"V
Back of VCR
Back of TV
Audio
AUDIO
HI-FI - OUT - SELECT
@1@
Coaxial AntennaCable*
Shown here is a simplified method of connecting a VCR to your
TV. The preferred method (using a 2-way signal splitter) is
shown above. On many VCRs, turning them on causes the
VCR's TV/VCR switch to go to the TV mode which internally
disconnects the antenna signals from the TV. By using a signal
splitter to run separate signals to the VCR and TV, you can view
TV programs or VCR tapes and not be concerned about the
position of the VCR's TViVCR switch.
Note: The audio/video connections from the VCR to the TV are
optional; however,these additional connections usually produce a
better-quality picture during VCR playback. These connections are
required, however,for stereo playback from stereo VCRs.
Operation:
• If the VCR is connected to INPUT 1 jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT2, select
channel 92 on the TV to view whatever the second device is
playing.
* Optional accessories are available from most dealers or electronics supply stores.
26
Advertisement
