Advertisement
Connecting Other Components
S-VHS or Standard VHS Camcorder
(This connection
allows you to play back tapes in the camcorder and watch them on the TV.)
ADAPTOR
Connector
Jack
"\
\\
\
\
\
S- VIDEO
....
Output Jack
Auto
AudioNideo
Output Adapter
(_)
(_
(usually supplied with
_
Back
of TV
_r
_Eu_crotn
camcorder)
i
{_)L
(_)
Video Out
Audio..,%
S-VHS
Cable
AudioNideo
Cable
"""
"%%_.._
I I
I
._"-'- ,,_,
zi//
(usually supplied with camcorder)
_
__T'_)
(_)
An S-VHS or standard
camcorder
can be connected
directly
to
your TV as shown above.
If you have an S-VHS camcorder,
connect the S-VHS video cable to the S-VIDEO
connector
on
your TV. If you have a standard
VHS camcorder,
connect
the
video cable to the VIDEO INPUT
1 jack on the back of your
TV. With either video connection,
attach the audio cable to the
INPUT 1 R/MONO
audio jack.
Notes:
• When the S-VHS Cable is connected to the S-VIDEO connector, the
video plug does not have to be connected. However, you may prefer to
plug it in anyway to keep it out of the way. The S-VHS video will
automatically override the VIDEO INPUT 1 signal when you select
Channel 90.
• Be sure to connect the video cable, however,if you plan to use the
SELECT OUT jacks for recording. When recording from the
SELECT OUT jacks, tune to channel 91 to see the signal from the
camcorder.
Operation:
• If the camcorder is connected to the VIDEO INPUT 1 jack
(instead of the S-VIDEO connector), select channel 91 on the
TV to view whatever the camcorder is playing.
• If the camcorder is connected to the S-VIDEO connector and
INPUT 1 audio jack, select channel 90 on the TV to view
whatever the camcorder is playing.
S-VHS or Standard VHS Camcorder
(This connection
allows you to record onto the camcorder
whatever
is currently being displayed on the TV screen.)
ADAPTOR
Connector
\\
Jack
\
Adapter Cable
AC Adapter/Charger
(usually supplied with
camcorder)
Audio
Video
AC Outlet
This connection will let you record onto the camcorder
whatever is being displayed on the screen such as a TV
program. You'll also be able to record signals from a VCR (or
similar device) that is connected to the TV's INPUT 1 or 2
jacks.
Note: You will not be able to record TV menus or status displays.
The TV must remain turned on during recording. If you change
channels on the TV, the channel change will be recorded on the
camcorder tape unless you pause the camcorder during
recording.
You may also want to use this connection to dub or edit VCR
tapes with two or three camcorders (or VCRs). By connecting
one camcorder (or VCR) to the INPUT I jacks and another
camcorder (or VCR) to the INPUT 2 jacks, you'll be able to
selectively edit and record whatever is playing on the TV screen
onto a third camcorder connected as shown here to the
SELECT 0 UT j acks.
If you connect a surveillance system to your monitor, you'll be
able to record what the camera is displaying on the TV screen
by connecting a camcorder (or VCR ) to the SELECT OUT
jacks as shown here.
To see the signal from a device connected to the INPUT 1
jacks, select channel 91. Select channel 92 to see the signal
from a device connected to the INPUT 2 jacks.
Note: Signals from the S-VIDEO connector do not come thru the
SELECT OUT jacks. To record from an S-VHS component, remember
to also connect its regular video cable to the VIDEO INPUT 1 jack and
then tune the TV to channel 91.
25
Advertisement
