Marlec Solar iBoost+ User Manual
Hide thumbs
Also See for Solar iBoost+:
- Installation and operating instruction (21 pages) ,
- Troubleshooting manual (2 pages) ,
- Installation instructions (5 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Marlec Solar iBoost+
Summary of Contents for Marlec Solar iBoost+
-
Page 1: User Manual
User Manual Doc. No: SM - 505 Iss A 01.08.18... -
Page 2: Water Tank
Solar iBoost+ User Guide Display Each press moves through the energy savings display cycle (see Energy savings) Excess energy is being diverted, when flashing A Enables programming mode (see Programming) Manual or Timed Boost operation, when illuminated B Enables the sender pairing process (see Pairing the Sender) When illuminated, a diagnostic message is displayed (see Trouble Shooting/Messages) Boost Provides a Boost of Hot Water (see Manual Boost) - Page 3 This warning can be reset by power cycling the Solar iBoost+ boost in 30 minute steps. 00:00 0.00hrs Further troubleshooting is available online www.marlec.co.uk/troubleshootmysolariboost B5 Winter Wk/Day Shutting Down Example: A setting of 07:00 1.5hrs will switch on the 00:00 0.00hrs Solar iBoost+ can be left to operate year round.
- Page 4 Maximise the Benefit of Your New Solar iBoost+ Pairing the Sender Unit The Solar iBoost+ and Sender are supplied uniquely paired and should not require the following operation. However, if the signal becomes lost or a new pairing is required the following Here’s a few tips to help capture and save more energy: procedure should be performed with the sender positioned 1m or more from the Solar iBoost+ Press any button on the Solar iBoost+ to switch on the backlight.
-
Page 5: Further Support
Defective parts must be returned by prepaid post and accompanied by a Returns Authorisation available in advance from Marlec Engineering Company Limited, Rutland House, Trevithick Road, Corby, Northamptonshire, NN17 5XY, England, or to an authorised agent.
Need help?
Do you have a question about the Solar iBoost+ and is the answer not in the manual?
Questions and answers
Why doesn't iBoost stay off when the timers are set?
The Marlec Solar iBoost+ does not stay off when the timers are set because it is designed to operate year-round and automatically divert excess solar energy to water heating. Even when the timers are set, the unit may still activate if there is available surplus power. Additionally, the built-in Boost feature allows short top-ups from the grid, and the system can be manually overridden using the iBoost+ Buddy if installed. To fully disable it, the 'Timed Boosts OFF' option must be selected, or the unit must be powered down.
This answer is automatically generated