Installing display assembly
1
Place the display assembly to align with the screw holders on the computer at 90 degree with keyboard facing the table.
2
Replace the six M2.5x5 screws that secure the display hinges to the palm-rest assembly.
3
Flip over the computer.
4
Connect the display cable to the connector on the system board.
5
Place the display cable bracket over the display cable connector, and replace the M2x3 screws to secure the display cable to the
computer.
6
Connect the WLAN cables.
7
Place the metal bracket on WLAN card, and replace the M2x3 screw to secure the metal bracket on the system board.
8
Install the:
a
battery
b
base cover
9
Follow the procedure in
Display back cover
30
Disassembly and reassembly
After working inside your
computer.