Installing speakers
1
Place the speakers into the slots on the computer.
2
Route the speaker cable through the retention clips through routing channel.
3
Affix the adhesive tape to secure the speaker cable on the computer.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
Display assembly
Removing display assembly
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove cables:
a
Remove the M2x3 screw [1] and lift the metal bracket that secures the WLAN card on the system board [2].
b Disconnect the WLAN cables [3].
c
Remove the two M2x3 screws [4] and lift the metal bracket that secures the display cable on the computer [5].
d Lift the latch, and disconnect the cable [6].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
27