Models - Ilmvac MP 301 Vp Operation Manual

3.4

Models

Pump head circuitry:
One-stage (E):
Ultimate pressure:
Types:
Two-stage (Z):
Ultimate pressure:
Types:
Three stage (T):
Ultimate pressure:
Types:
Four-stage (V):
Ultimate pressure:
Types:
Materials of the medium-affecting pump parts:
Component
Connection- / pump head
Seal
Screw fitting
Valves
Diaphragm
Connecting elements
Notes:
PTFE with carbon-fibre reinforcement, electrically conductive (with manufacturer's certificate
of electrical conductivity).
Material resistance to aggressive media see:
"Kunststoff Kautschuk Produkte", Jahreshandbuch der Verarbeiter 2000/2001 ("Plastic,
Rubber Products", Annual Handbook of the Processor 2000/2001), Publisher Hoppenstedt
Darmstadt, Vienna, Zurich.
Special designs:
• Special diaphragm pumps can be supplied after consultation with the manufacturer or for
a corresponding supply contract.
• Explosion protection motors.
• Motors for different voltages.
Four pump heads are connected in parallel.
< 75 mbar
MP 1201 Ep and MPC 1201 Ep
Three pump heads are in parallel, the fourth in series.
< 8 mbar
MP 901 Zp and MPC 901 Zp
Two pump heads are in parallel, the other two in series.
< 2 mbar
MP 601 Tp and MPC 601 Tp
Four pump heads are connected in series.
< 1 mbar
MP 301 Vp and MPC 301 Vp
Standard design
MP type
Aluminium
EPDM
PA / PP
PEEK
NBR fabric reinforced with
a PTFE layer
PP
4000722
Description
Chemical model
MPC type
(resistant to aggressive gases)
PTFE
with carbon-fibre reinforcing
EPDM
PVDF / PP
PEEK
NBR fabric reinforced with
a PTFE layer
PP
9