Advertisement
REMOVABLE
OVEN
DOOR
To
rentove:
1. Open the door to the atop position (see Illustration).
2. Grasp the door at each side and lift up and off the
hinges. Do not lift door by the handle. Glass break-
age or damage to the door could result.
NOTE: When the door is removed
and hinge arms
are at stop posiUon,
do not bump or try to move
the hinge
arms.
The
hinges
could
snap back
causing
an injury to the hands or damage
to the
porcelain
on the front of the range.
Cover the
hinges with toweling
or empty
towel
rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
still
be in the
stop
position.
2. Slide the door down onto the hinges as far as It will
go and close the door.
STOP (BR_L)POSmON
HINGI
STOP POSITION
REMOVABLE
OVEN
RACKS
Be careful not to scratch the oven flnleh when Installing
or removing oven racks.
To install:
1. Set the raised back edge of the rack on a pair of rack
guides,
2. Push the rack In until you reach the bump in the rack
guide, then lift the front of the rack a bit and push the
rack all the way In.
To remove:
1. Pull the oven rack out, then up, in one motion.
See
the cleaning chert.
BUMP
GUIDE
Note:
For best performance
remove
oven racks
during a clean cycle.
If oven racks ere left
in the range during a clean cycle, they will
darken,
lose their luster and become
hard
to slide.
If you choose to leave the racks
in the oven, you can polish
the edges of
the
racks
with
steel
wool
and apply
a
small amount
of vegetable
oil to the rack
edges after the self-clean
cycle.
This wgl
make the racks
easier
to slide.
Note= The racks
are designed
with stop locks.
When the racks
are placed
correctly
on
the rack support
and extended
from the
oven
the stop
locks
prevent
the
racks
from
tilting
when
removing
foods
from
them or placing
foods on thorn.
15
NEMNT71-1
Advertisement
