Phone Settings; Display; Security - Energizer PM20 User Manual

Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close

the function because the function requires the network support.
Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.

Hide ID: Default status is Display ID by network.

Others: The settings item include Call tome minute reminder, Auto redial, Vibration when connection, Reply SMS after reject and Auto record voice

call.

10.2. Phone settings

You can customize your favorite phone functions based on your interest with this function.
Date & Time: You can set time, date and format for your phone.

Language settings：Set the current system language.

Shortcut settings: You can set the navigation keys designated menu.

Auto power on/off：Phone can power on/off according to your preset time.

Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 0000.


10.3. Display

Animation effect: Set the power-On or power-Off animations.

Wallpaper settings: Set an image as wallpaper.

Idle display settings: On, it will be displayed in the standby interface.

Contrast: Adjust the displaying contrast.

Backlight: Set the backlight time.

Keypad backlight time: Set the duration for keypad backlight.


10.4. Security

The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone
when leaving the factory is 0000.The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network
operator.
PIN: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.

Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)

Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each

power-on.
Modify the cellphone password: You can change the phone password.

Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.

9