Charging Equipment Notes - SAMCOM FPCN30A User Manual

Battery
If some of your body exposed conductive material contact the battery outside terminals, it will cause damage to
property, or burns on human body. These conductive materials include jewelry, keys, or beaded necklace, they
will form a loop with the battery (causes short circuit), generate considerable heat. Rechargeable battery storage
must be very careful, especially been put in the pocket, purse or other container with metal objects. Waste batteries
should not be abandoned in a fire.
Earphone
Before using the earphone, first turn the volume down so as to avoid excessive hearing damage.
Speaker
When the volume setting is high, the transceiver can not be too close to your ear, otherwise it will damage hearing.

Charging Equipment Notes

1. Do not expose the charger to rain or snow.
2. Chargers by severe impact, or has been dropped, or subject to any damaged, do not use again.
3. Can not disassemble the chargers by severe impact, or has been dropped, or subject to any damaged.
4. Can not replace the original power cord and plug provided. If plugs and sockets do not match, please ask the qualified
electrician to install an outlet to avoid electric shock.
5. To avoid damage to the power cord or outlet, holding and pull out the plug from the wall socket, do not pull the power cord to pull g p
the plug.
6. To avoid electric shock, pulling out the charger plug from the wall socket prior to maintenance or cleaning.
7. The use of non proposed or supply attachments may cause fire, electric shock or personal injury.
8. Take care the power cord location, it should not be trampled, do not stumble, will not suffer damage or compression.
9. Unless absolutely necessary, do not use extension cords. Improper use of extension cords can cause fire or electric shock.
If you must use an extension cord, make sure:
to use the same extension cord plug pins.
plug specifications same as the charger plug.
length of 30 meters or less using 18AWG wire, the length of 45 meters or less using 16AWG wire.
10. Can not replace the charger power cord. When the power cord is damaged, should immediately stop using the charger.
Get Familiar with the transceiver
(1) PTT Transmitting
(2) MONI (monitor) button
, g p p g
4
, p p p