Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Aqualytic AL10pH
Summary of Contents for Aqualytic AL10pH
- Page 1 AL10pH pH - Instruction Manual...
-
Page 2: Table Of Contents
Unpacking Please check that the shipment includes the following items: • AQUALYTIC AL10pH ® • AQUALYTIC AL10pH sensor plastic/gel-type with BNC plug ® • 9V Battery • Protective cover • 7 Screws • Screwdriver • Plastic Cover Calibration Screws •... -
Page 3: Specification
External, pH 4.0 (slope adjustment) & pH 7.0 (Cal. adjustment) Power Supply 006P DC 9V battery Power Consumption Approx. 2.0 mA Dimension 208 x 110 x 34 mm (L x W x H) Weight Approx. 380 g pH electrode pH plastic type, gel electrolyte with BNC connector AL10pH... -
Page 4: Functional Description
(0 mV at pH 7, based on 25°C working temperature). Ho- wever, because most pH electrodes do not exactly replicate the ideal electrode and because the working temperature may differ from 25°C, it is necessary to calibrate the instrument to ensure measurement accuracy of the combined pH electrode. AL10pH... -
Page 5: Calibration
At the same time the display will show a Data Hold indicator. To release the display freeze function, press the Data. Hold Button again; the Data Hold indicator will disappear from the display. v) After taking a measurement, rinse the electrode in distilled water. AL10pH... -
Page 6: Changing The Battery
Electrodes are subjected to a natural ageing effect, which in- duces shift of the offset point and gradient of the electrode. For slowing down the ageing effect and for maintaining the performance and accuracy, please note the following considerations: AL10pH... - Page 7 - Water soluble contaminations: distilled water (tap water) - Chalk and hydroxide deposits: Hydrochloric acid (10 %) - Fats and oils: Warm water and mild detergents (dishwashing detergent) Attention: Do not use petroleum, ether or similar chemicals for plastic-covered electrodes. AL10pH...
- Page 8 Tintometer GmbH, Division Aqualytic ® Schleefstraße 8-12 44287 Dortmund Tel.: (+49) (0)2 31 / 9 45 10-755 Fax: (+49) (0)2 31 / 9 45 10-750 sales@aqualytic.de Technical changes without notice www.aqualytic.de Printed in Germany 04/15 Germany No.: 00 38 60 77...
Need help?
Do you have a question about the AL10pH and is the answer not in the manual?
Questions and answers