Sesto Senso Advanced Parameter Settings - PrimaLuceLab SESTO SENSO Manual

P r i m a L u c e L a b i S r l
By clicking the upper right button on SESTO SENSO software, it will show the advanced parameters that may be used, for
example, to have a perfect match of SESTO SENSO with your telescope's focuser, to better support the weight of the ima-
ging accessories you use (camera, off axis guider, filter wheel, etc.) used in astrophotography.
Quick Settings:
In order to simplify SESTO SENSO settings, we created some preset profiles from which you can start to create the ideal
configuration based on the weight load applied to the focuser and the moving speeds you want.
Light and Fast button sets the current values all to 10, Acceleration values to 138, Run to 65 and Deceleration to 138, and
is recommended for light loads.
Medium button sets the current values all to 15, Acceleration values to 70, Run to 40 and Deceleration to 70, and is re-
commended for medium loads.
Heavy and Slow button sets the current values all to 20, Acceleration values to 50, Run to 25 and Deceleration to 50, and
is recommended for heavy loads.
Advanced Settings:
In the first set of commands ("Current settings"), the operating currents of the SESTO SENSO motor are reported, the va-
lues that can be set range from 0 to 24.
• Acceleration: set the current in acceleration ramp
• Run: set the current after acceleration ramp during RUN
• Deceleration: set the current in deceleration ramp
• Hold: set the hold current, when the motor is stopped

SESTO SENSO advanced parameter settings

p a g e ! 1 3
S E S T O S E N S O u s e r m a n u a l