Table of Contents
Advertisement
40
LW drives
Terminating the drive
ST118202LW drives do not have internal terminators or any
other way of adding internal termination to the drive. You must
provide external termination to these drives when termination is
required. This is normally done by adding an in-line terminator
on the cable.
Note. Use active (ANSI SCSI-2 Alternative 2) single-ended ter-
minators when terminating a bus operating in single-
ended mode. Use SPI-2-compliant active low voltage dif-
ferential terminators when terminating a SCSI Ultra2 bus
operating in LVD mode.
Cheetah 18 Installation Guide, Rev. A
Advertisement
Table of Contents
