Set Dhcp Field - Cisco Unified 6921 Administration Manual

Cisco Unified IP Phone Settings
Option
Default Router 1
DNS Server 1
Alternate TFTP
TFTP Server 1
TFTP Server 2
DHCP Address Released

Set DHCP Field

Procedure
Step 1
Scroll to the DHCP option.
Step 2 Press Edit.
Step 3 Press either No to disable DHCP, or press Yes to enable DHCP.
Description
Default router used by the phone (Default
Router 1).
Primary Domain Name System (DNS)
server (DNS Server 1) and optional backup
DNS servers (DNS Server 2–5) used by the
phone.
Indicates whether the phone is using an
alternative TFTP server.
Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. If you are
not using DHCP in your network and you
want to change this server, you must use the
TFTP Server 1 option.
If you set the Alternate TFTP option to yes,
you must enter a nonzero value for the TFTP
Server 1 option.
Optional backup TFTP server that the phone
uses if the primary TFTP server is
unavailable.
Releases the IP address assigned by DHCP.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager
Set DHCP Field
To Change
Set Default Router Field, on
page 10
Set DNS Server Field, on page
10
Set Alternate TFTP Field, on
page 11
Set TFTP Server 1 Field, on
page 11
Set TFTP Server 2 Field, on
page 11
Release DHCP Address, on
page 12
10.0 (SCCP and SIP)
9