Sonos User Manual page 60

SONOS USER GUIDE
Connector panel
Ethernet ports
Right speaker terminals
Ethernet ports (2)
Right speaker terminals
Left speaker terminals
Voltage select
AC power (mains) input
Analog audio in
Subwoofer output
Note: If you disconnect your subwoofer, make
sure to also disconnect the subwoofer's
cable from the Connect:Amp output.
Connect the cables
Attach desired speakers
Analog audio in
Left speaker terminals
You can use an Ethernet cable (supplied) to connect to a
router, computer, or additional network device like a
network-attached storage (NAS) device.
LED indicators:
Use high-quality speaker wire to connect the right
speaker to Connect:Amp.
Use high-quality speaker wire to connect the left
speaker to Connect:Amp.
100 – 120V~ / 220 – 240V~ 50 – 60 Hz
Select the appropriate voltage setting for your country.
Use only the supplied power cord to connect to a power
outlet (using a third party power cord will void your
warranty).
You may use a standard RCA audio cable to connect the
Connect:Amp's analog audio inputs to the audio outputs
from a separate audio component, like a turntable.
You may connect a powered subwoofer to this output
using a standard RCA cable. The system will detect
when a cable is connected to the subwoofer output and
adjust the crossover frequency automatically.
Subwoofer output
Voltage select
AC power (mains)
input
•
Green (link connection)
•
Flashing Yellow (network activity)