Controls And Lights; Select A Location - Sonos User Manual

SONOS USER GUIDE

Controls and lights

Status light
Connector panel
Join button
Ethernet port
AC power (mains)
input

Select a location

You can put your speaker just about anywhere. Here's a few guidelines:
• Sonos One sounds great even when placed next to a wall or on a shelf. For best performance, leave at
least 1" (2.5 cm) space around the back of the speaker.
• It's humidity-resistant so you can use it in the bathroom.
• It's not water-resistant so don't put it near water or leave it in the rain.
Volume control
Play/Pause
Next/Previous
Microphone
indicator
•
Touch and hold to quickly change the volume:
•
Volume up (right); Volume down (left).
•
Press once to play or pause music.
•
Press and hold to add the music that's playing in
another room.
•
Swipe right across the touch controls to skip to the
next song.
•
Swipe left to go to the previous song.
Note: You can't skip forward or go back when listening
to a radio station.
•
Tap the microphone light to turn the microphone on
or off.
•
When the light is on, voice control is on and you can
use voice commands.
•
When the light is off, voice control is off.
Note: If the light is off, press and hold the Microphone
indicator to talk to Alexa. Release the button to
turn voice control off again.
Indicates the status. For more information, see 
https://faq.sonos.com/led.
Press to connect during setup.
Use the supplied Ethernet cable if you want to connect
to a router, computer, or network-attached storage
(NAS) device (optional).
Use only the supplied power cord (using a third-party
power cord will void your warranty).
Note: Insert the power cord firmly until it is flush with
the bottom of the speaker.