Interface Requirements; Fc-Al Features; Fibre Channel Link Service Frames - Seagate Savvio 15K.1 FC ST973451FC Product Manual

9.0

Interface requirements

This section partially describes the interface requirements as implemented on Savvio drives. Additional infor-
mation is provided in the Fibre Channel Interface Manual (part number 100293070).
9.1

FC-AL features

This section lists the Fibre Channel-specific features supported by Savvio drives.
9.1.1

Fibre Channel link service frames

Table 5 lists the link services supported by Savvio drives.
Table 5: Link services supported
Type of frame
Basic link service frames
Basic link service reply frames
Extended link service frames
Extended link service reply frames
Fibre Channel Services
Savvio 15K.1 FC Product Manual, Rev. B
Link service
Abort Sequence (ABTS)
Basic_Accept (BA_ACC)
Basic_Reject (BA_RJT)
N_Port Login (PLOGI)
Fabric Login (FLOGI)
Logout (LOGO)
Process Login (PRLI)
Process Logout (PRLO)
Read Link Status (RLS)
Fabric Address Notification (FAN)
Port Discovery (PDISC)
Address Discovery (ADISC)
Third-party Process Logout (TRPLO)
Accept (ACC)
Link Service Reject (LS_RJT)
Register FC-4 Types (RFT_ID)
43