Table of Contents
Advertisement
9.6.2
Differential PECL output
The serial PECL output signal voltage characteristics are provided in Table 26. The outputs are not AC coupled
in order to deliver maximum signal without rise and fall time degradation. You must AC couple the receiver to
isolate potentially different DC characteristics of the outputs and the receiver.
Table 26:
Differential PECL output characteristics
Description
Serial output voltage swing
Figure 18 provides the data output valid eye diagram relative to the bit cell time.
Figure 18. Transmit eye diagram
9.6.3
Differential PECL input
The serial PECL input signal voltage characteristics are provided in Table 27.
Table 27:
Differential PECL input characteristics
Description
Serial input voltage swing
Figure 19 provides the data valid eye diagram for typical and minimum requirements to recover data at the
specified interface error rate. The inputs are AC coupled on the drive.
Figure 19. Receive eye diagram
Savvio 15K.1 FC Product Manual, Rev. B
Parameter
600 < V
< 1300 mV
out
941 ps
800 ps
Parameter
200 < V
< 1.300 mV
in
941 ps
659 ps
376 ps
Notes
Centered at 1.32V
Notes
AC coupled
Typical
Minimum
65
Advertisement
Table of Contents
