Table of Contents
Advertisement
Table 15:
Supported commands (continued)
Command code
Supported [4]
80h
N
81h
N
82h
N
83-8Fh
N
A0h
Y
C0-DFh
N
EO-FFh
N
[1]
Savvio drives can format to any multiple of four bytes per logical block in the range 512 to 528 bytes.
[2]
Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3]
Reference Mode Sense command 1Ah for mode pages supported.
[4]
Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
54
Command name
XD write extended
Rebuild
Regenerate
Not used
Report LUNS
Not used
Not used
Savvio 15K.1 FC Product Manual, Rev. B
Advertisement
Table of Contents
